Customer support

MultiFolks Fit Guide

Here’s a step‑by‑step guide to adjust the fit of multifocal glasses at home so you get proper vision through all three zones (distance, intermediate, and near) without visiting a store:

1. Check How They’re Sitting First

Before adjusting anything, put your glasses on and note:

  • Are you tilting your head up/down to see clearly at distance or near?
  • Do you have to look sideways to get clear focus?
  • Are the frames slipping down your nose?
  • Is one lens higher or closer than the other?

These clues help identify what needs adjusting.

2. Fix Frame Height (Fitting Height)

For multifocal, your eyes must naturally align with the correct zones:

  • The distance zone should be at or just above your pupil line.
  • The near zone should align with your natural reading angle when looking down.

If the frame is too high or low:

  • Lower it by carefully bending the nose pads outward (for metal frames) so the frame sits lower.
  • Raise it by pushing the nose pads inward so it sits higher.
  • For plastic frames without nose pads, adjust by slightly bending the arms near the hinges so the frame tilts correctly.

3. Level the Lenses (Horizontal Alignment)

If one lens seems higher:

  • Bend the temple (arm) down on the side where the lens is too high (this lowers that side).
  • Do the opposite to raise a side.

Do this slowly using gentle pressure near the hinge, not at the tip, to avoid cracking the arm.

4. Secure the Fit Around Your Ears

Slipping frames can ruin your multifocal alignment because the near zone drops too low.

  • Heat the temple tips gently (hairdryer on low for 30 seconds if they’re plastic).
  • Bend them slightly inward and downward so they hug behind your ears comfortably.

5. Check the Tilt (Pantoscopic Tilt)

Multifocal are designed to work best with a slight forward tilt (around 8–12°).

  • If your frames sit too upright or lean back, carefully bend the arms downward near the hinge so the bottom of the lenses angle slightly closer to your cheeks.

6. Re-Test Your Vision Zones

  • Look straight ahead — you should see distance clearly without tilting your chin.
  • Look slightly down for computer — intermediate zone should be natural.
  • Look down at reading distance — the near zone should engage without straining your neck.

Quick Tips:

  • Always use both hands when bending to avoid twisting the frame.
  • Make small adjustments (1–2 mm at a time).
  • If your lenses are popping out or the frame feels fragile, don’t force it — visit an optician.
  • Clean and dry your hands and frames before starting.